LaserDance
Introducing LazrBotz & BounzBotz !
“A
New Paintbrush for the Laser Artist”
THE TRADITIONAL WAY…...
Traditional fixed bounce mirrors used with laser
shows are fixed at the time of installation, limiting the mirror to
a singe use and requiring the use of dozens or hundreds of bounce
mirrors and many beam “ports” to create a large number of bounced
beam patterns.
INTRODUCING
LAZRBOTZ & BOUNZBOTZ
The LazrBotz and BounzBotz are DMX-512
controlled remote laser targeting mirror systems. LazrBotZ contain
a laser light source, while the BounzBotz contain the same remotely
controlled mirror system, but without an integrated laser light
source.
DYNAMIC BEAM STEERING!
Since the mirrors can be repositioned in a fraction
of a second, the same beam pattern never need be repeated.
MOTION FROM MULTIPLE LOCATIONS
The dynamic Botz also allows motion to originate from
multiple locations in the venue, rather than just from the main
laser projector.
PRECISE BEAM POSITION!
Both families of products incorporate ultra high
resolution digital programmable servos which allow extremely precise
and repeatable high speed beam pointing needed for creating
intricate multi-bounce patterns. The level of accuracy required for
lasers is not achievable with traditional stepper motor-driven DMX
mirrors.
USE WITH CONVENTIONAL LIGHTING TOO!
BounzBotz
and LazrBotz can also be used as high precision, high speed DMX
controlled mirrors for conventional lighting shows as well.
SAFETY
Laser safety is assured due to
the integrated laser beam block. Each Bot includes a physical
safety beam block that prevents the mirror from directing beams into
the audience area regardless of the position of the mirror. Although
the beam block can be moved remotely via DMX signals, LazrBotz
integrate an additional safety system to prevent the emission of
hazardous levels of laser light when the beam block is being
remotely positioned with DMX signals.
INTEGRATE WITH EXISTING BEAMSHOW PROJECTORS
Use your existing Beamshow and
Graphics Projectors to target remote BounzBotz and LazrBotz mirrors.
LazrBotz can also be used as bounce mirrors, by sending DMX signal
to turn Laser Channel off and reposition the mirror as part of
normal show programming.
Why Botz?
The Botz line of moving mirrors
allow dynamic beam steering on the fly so that the number of
patterns that can be created is virtually unlimited!!
· Moving
mirrors allow dynamic beam steering
· Mirrors
can be repositioned in a fraction of a second
· Same
beam pattern need never be repeated
· Motion
originates from virtually anywhere in the venue
· Ultra
high resolution digital programmable servos allow extreme precision
· Repeatable
high speed beam pointing to create intricate multi-bounce patterns
· BounzBotz
can also be used with conventional lighting
· Laser
beam block for additional safety
· Class
4 Lasers
· Fully
compliant with US and IEC International Laser Product laws and
standards.
COMPLIANCE
All LazrBotz and those BounzBotz products sold for laser use are
fully compliant with US and IEC International Laser Product laws and
standards. Products are US certified Class 4 demonstration laser
products.
MS Publisher Flyer
Flyer Page 1(JPEG)
Flyer Page 2(JPEG) |
